1.Description
This module is used in conjunction with the DCS IP gateway (Gira Article No. 2620xx). DCS bus devices which have been called or are waiting for call acceptance can be reset to normal system state, i.e. the optical and acoustic signalling of the active call is reset.
With the optional assignment of the Input 2, DCS bus device groups can be specifically reset.
Application example:
When a door call is triggered, in addition to the connected home stations, the DCS Communicator connected to the DCS IP gateway also signals the active door call. If the door is opened outside the door communication in this status, the called DCS bus devices can be reset to normal mode via the HomeServer.
With the optional assignment of the Input 2, DCS bus device groups can be specifically reset.
Application example:
When a door call is triggered, in addition to the connected home stations, the DCS Communicator connected to the DCS IP gateway also signals the active door call. If the door is opened outside the door communication in this status, the called DCS bus devices can be reset to normal mode via the HomeServer.
Important
The module requires the firmware version of the DCS IP gateway 1.11 or higher!
2.Inputs
| No. | Name | Initialisation | Description |
|---|---|---|---|
| 1 | Trigger | 0 | Each time a 1-telegram is received at this input, a telegram is generated for the DCS IP gateway and is output at the output. |
| 2 | DCS bus devices | 3 | Optional specification of a group of DCS bus devices. The following values are possible: 1 = Terminate call status of all DCS Communicators 2 = Terminate call status of all other DCS bus devices 3 = Terminate call status of all DCS bus devices (also DCS Communicator) The input is initialised to value 3. Important For call participation of the DCS IP gateway, the sole termination of the call status of DCS bus devices (default value 2) is not possible! In this case, the call status of a third DCS bus device called at the same time is notchanged. |
3.Outputs
| No. | Name | Initialisation | SBC | Description |
|---|---|---|---|---|
| 1 | Door communication Send | "" | s | (14 bytes – Text) Here the internal communication object Door communication Send is assigned by the DCS IP gateway. |
| 2 | Error output | 0 | s | The output can be routed to the outside as a diagnostic output if necessary or during start-up in order to obtain information about possible errors. Values in the value range of 0 to 1 are sent. 0 = An error has not occurred. 1 = The default values must be checked. |
s = send, sbc = send by change
4.Other
| Recalculation during start: | No |
|---|---|
| Module is retentive: | Yes |
| Internal designation: | 16951 |
| Category: | Door communication\Send |
5.Similar functions
Receive
Switching action
Floor call
Internal call
Door call (incl. bell symbol on code keypad)
Switching action Keyless In
Door opener command
Door opener command of device with KeyLess In
Light function
Evaluation Sabotage KeyLessIn
Evaluate status automatic door opener DCS Communicator
Button event DCS Communicator
Button event home station/TC gateway
Evaluate voice message door station
Evaluate status of forwarding
Response - Evaluate status of JPEG image call
Evaluation of sabotage control device
Floor call
Internal call
Door call (incl. bell symbol on code keypad)
Switching action Keyless In
Door opener command
Door opener command of device with KeyLess In
Light function
Evaluation Sabotage KeyLessIn
Evaluate status automatic door opener DCS Communicator
Button event DCS Communicator
Button event home station/TC gateway
Evaluate voice message door station
Evaluate status of forwarding
Response - Evaluate status of JPEG image call
Evaluation of sabotage control device
Receive\Evaluate code from code keypad
Universal filter function with code specification as text
Universal filter function with code specification as value
Universal filter function with code specification as value
Send
Light function
Switching action
Query/set automatic door opener DCS Client
Door station voice message
Query/set forwarding
Switching action
Query/set automatic door opener DCS Client
Door station voice message
Query/set forwarding
Additional modules