1.Description
The module is specially matched to the logic nodes in the area of door communication for the Gira DCS-IP gateway (Article No. 2620xx).
The module is suitable for the comparison of values with default values (e.g. sender types, Keyless In device types or index numbers).
If a comparison is correct, then the related output is set to the value 1.
If the value does not match any specification, then, for example, an entry can be made in a message archive.
If a telegram is received at Input 1, then all 7 comparison values are compared consecutively with the value (Input 1).
If one of the comparison values matches the value at Input 1, then a 1 is sent to the related output and the comparison is cancelled.
If no value matches, then Output 8 sends a 1 telegram. Telegrams to Inputs 2-8 do not cause a calculation of the module.
The module is suitable for the comparison of values with default values (e.g. sender types, Keyless In device types or index numbers).
If a comparison is correct, then the related output is set to the value 1.
If the value does not match any specification, then, for example, an entry can be made in a message archive.
If a telegram is received at Input 1, then all 7 comparison values are compared consecutively with the value (Input 1).
If one of the comparison values matches the value at Input 1, then a 1 is sent to the related output and the comparison is cancelled.
If no value matches, then Output 8 sends a 1 telegram. Telegrams to Inputs 2-8 do not cause a calculation of the module.
2.Inputs
| No. | Name | Initialisation | Description |
|---|---|---|---|
| 1 | Input value | 0 | This input receives the variable value with which the 7 comparison values are compared. |
| 2 | Comparison value 1 | -1 | Value to be compared. |
| 3 | Comparison value 2 | -1 | Value to be compared. |
| 4 | Comparison value 3 | -1 | Value to be compared. |
| 5 | Comparison value 4 | -1 | Value to be compared. |
| 6 | Comparison value 5 | -1 | Value to be compared. |
| 7 | Comparison value 6 | -1 | Value to be compared. |
| 8 | Comparison value 7 | -1 | Value to be compared. |
3.Outputs
| No. | Name | Initialisation | SBC | Description |
|---|---|---|---|---|
| 1 | Trigger for comparison value 1 | 0 | s | The output sends a 1 when the value received at Input 1 matches the value at Input 2. |
| 2 | Trigger for comparison value 2 | 0 | s | The output sends a 1 when the value received at Input 1 matches the value at Input 3. |
| 3 | Trigger for comparison value 3 | 0 | s | The output sends a 1 when the value received at Input 1 matches the value at Input 4. |
| 4 | Trigger for comparison value 4 | 0 | s | The output sends a 1 when the value received at Input 1 matches the value at Input 5. |
| 5 | Trigger for comparison value 5 | 0 | s | The output sends a 1 when the value received at Input 1 matches the value at Input 6. |
| 6 | Trigger for comparison value 6 | 0 | s | The output sends a 1 when the value received at Input 1 matches the value at Input 7. |
| 7 | Trigger for comparison value 7 | 0 | s | The output sends a 1 when the value received at Input 1 matches the value at Input 8. |
| 8 | Other case | 0 | s | If the value received at Input 1 does not match any of the comparison values, then the output sends a 1. |
s = send, sbc = send by change
4.Other
| Recalculation during start: | No |
|---|---|
| Module is retentive: | No |
| Internal designation: | 16938 |
| Category: | Door communication\Additional modules |
5.Similar functions
Receive
Switching action
Floor call
Internal call
Door call (incl. bell symbol on code keypad)
Switching action Keyless In
Door opener command
Door opener command of device with KeyLess In
Light function
Evaluation Sabotage KeyLessIn
Evaluate status automatic door opener DCS Communicator
Button event DCS Communicator
Button event home station/TC gateway
Evaluate voice message door station
Evaluate status of forwarding
Response - Evaluate status of JPEG image call
Evaluation of sabotage control device
Floor call
Internal call
Door call (incl. bell symbol on code keypad)
Switching action Keyless In
Door opener command
Door opener command of device with KeyLess In
Light function
Evaluation Sabotage KeyLessIn
Evaluate status automatic door opener DCS Communicator
Button event DCS Communicator
Button event home station/TC gateway
Evaluate voice message door station
Evaluate status of forwarding
Response - Evaluate status of JPEG image call
Evaluation of sabotage control device
Receive\Evaluate code from code keypad
Universal filter function with code specification as text
Universal filter function with code specification as value
Universal filter function with code specification as value
Send
Light function
Switching action
Query/set automatic door opener DCS Client
Door station voice message
Query/set forwarding
Terminate call status of DCS bus devices
Switching action
Query/set automatic door opener DCS Client
Door station voice message
Query/set forwarding
Terminate call status of DCS bus devices
Additional modules