1.Description
This module is used in conjunction with the DCS IP gateway (Gira Order No. 2620 ..).
The module enables a predefined voice message (which is available as a ".wav" file) to be played back on a door station via the Gira HomeServer.
A maximum of 5 voice messages can be played back sequentially on the door station.
The activation of the EIB alarm control unit is also acknowledged using a voice message on the door station of the Gira door communication.
The module enables a predefined voice message (which is available as a ".wav" file) to be played back on a door station via the Gira HomeServer.
A maximum of 5 voice messages can be played back sequentially on the door station.
The activation of the EIB alarm control unit is also acknowledged using a voice message on the door station of the Gira door communication.
Note
The module requires the firmware version of the DCS IP gateway 3 or higher!
2.Inputs
| No. | Name | Initialisation | Description |
|---|---|---|---|
| 1 | Trigger Door station voice message | 0 | (1 bit) When a 1-telegram is received, a telegram is generated to retrieve a voice message at the DCS IP gateway. |
| 2 | ID - 1st Voice message | 0 | (0-255) Unique ID of the voice message which should be called up first. Voice messages that are not used are assigned 0. |
| 3 | ID - 2nd Voice message | 0 | (0-255) Unique ID of the voice message which should be called up at 2nd position. Voice messages that are not used are assigned 0. |
| 4 | ID - 3rd Voice message | 0 | (0-255) Unique ID of the voice message which should be called up at 3rd position. Voice messages that are not used are assigned 0. |
| 5 | ID - 4th Voice message | 0 | (0-255) Unique ID of the voice message which should be called up at 4th position. Voice messages that are not used are assigned 0. |
| 6 | ID - 5th Voice message | 0 | (0-255) Unique ID of the voice message which should be called up at 5th position. Voice messages that are not used are assigned 0. |
| 7 | Target address | "" | (14-byte text) Specification of a target address from where the voice message should be issued. The target address must have the following format here: Example: 0xABCD07 or 0x42A305 |
3.Outputs
| No. | Name | Initialisation | SBC | Description |
|---|---|---|---|---|
| 1 | Door communication Send | "" | s | (14 bytes – Text) Here the internal communication object Door communication Send is assigned by the DCS IP gateway. |
| 2 | Error output | 0 | s | The output can be routed to the outside as a diagnostic output if necessary or during start-up in order to obtain information about possible errors. Values in the value range of 0 to 1 are sent. 0 = An error has not occurred. 1 = Check the default values for the target address. |
s = send, sbc = send by change
4.Other
| Recalculation during start: | No |
|---|---|
| Module is retentive: | Yes |
| Internal designation: | 16940 |
| Category: | Door communication\Send |
5.Similar functions
Receive
Switching action
Floor call
Internal call
Door call (incl. bell symbol on code keypad)
Switching action Keyless In
Door opener command
Door opener command of device with KeyLess In
Light function
Evaluation Sabotage KeyLessIn
Evaluate status automatic door opener DCS Communicator
Button event DCS Communicator
Button event home station/TC gateway
Evaluate voice message door station
Evaluate status of forwarding
Response - Evaluate status of JPEG image call
Evaluation of sabotage control device
Floor call
Internal call
Door call (incl. bell symbol on code keypad)
Switching action Keyless In
Door opener command
Door opener command of device with KeyLess In
Light function
Evaluation Sabotage KeyLessIn
Evaluate status automatic door opener DCS Communicator
Button event DCS Communicator
Button event home station/TC gateway
Evaluate voice message door station
Evaluate status of forwarding
Response - Evaluate status of JPEG image call
Evaluation of sabotage control device
Receive\Evaluate code from code keypad
Universal filter function with code specification as text
Universal filter function with code specification as value
Universal filter function with code specification as value
Send
Light function
Switching action
Query/set automatic door opener DCS Client
Query/set forwarding
Terminate call status of DCS bus devices
Switching action
Query/set automatic door opener DCS Client
Query/set forwarding
Terminate call status of DCS bus devices
Additional modules