1.Description
This module is used in conjunction with the DCS IP gateway (Gira Order No. 2620 ..).
The Gira HomeServer allows a forwarding to be set or the current status of the forwarding to be read out.
Inputs 1 to 3 are used as trigger inputs and allow the forwarding to be activated, deactivated or its current status to be read out.
The forwarding ID whose status should be changed or read out is specified via Input 4.
The Gira HomeServer allows a forwarding to be set or the current status of the forwarding to be read out.
Inputs 1 to 3 are used as trigger inputs and allow the forwarding to be activated, deactivated or its current status to be read out.
The forwarding ID whose status should be changed or read out is specified via Input 4.
Note
The forwarding ID can be read from the HomeServer cheat sheet of the DCS IP gateway for the desired call button.
The module requires the firmware version of the DCS IP gateway 3 or higher!
The evaluation of a status query or state change is via the logic node "Evaluate forwarding status feedback" in the Door communication\Receive folder.
The evaluation of a status query or state change is via the logic node "Evaluate forwarding status feedback" in the Door communication\Receive folder.
2.Inputs
| No. | Name | Initialisation | Description |
|---|---|---|---|
| 1 | Trigger: Activate forwarding | 0 | Each time a telegram is received with an input value greater than zero at this input, a telegram is generated to switch on forwarding for the DCS IP gateway and is output at the output. |
| 2 | Trigger: Deactivate forwarding | 0 | Each time a telegram is received with an input value greater than zero at this input, a telegram is generated to switch off forwarding for the DCS IP gateway and is output at the output. |
| 3 | Trigger: Query forwarding status | 0 | Each time a telegram is received with an input value greater than zero at this input, a telegram is generated to query the status of the forwarding setting for the DCS IP gateway and is output at the output. |
| 4 | Number of forwarding ID | 0 | Specification of a forwarding ID for which forwarding behaviour is set or queried. The input is pre-initialised with the value 0, which means a value in the value range from 1 to 255 must be parameterised! Note The forwarding ID can be read from the HomeServer cheat sheet of the DCS IP gateway for the desired call button. |
3.Outputs
| No. | Name | Initialisation | SBC | Description |
|---|---|---|---|---|
| 1 | Door communication Send | "" | s | (14 bytes – Text) Here the internal communication object Door communication Send is assigned by the DCS IP gateway. |
| 2 | Error output | 0 | s | The output can be routed to the outside as a diagnostic output if necessary or during start-up in order to obtain information about possible errors. Values in the value range of 0 to 1 are sent. 0 = An error has not occurred. 1 = The default values for the number of the forwarding ID must be checked. |
s = send, sbc = send by change
4.Other
| Recalculation during start: | No |
|---|---|
| Module is retentive: | Yes |
| Internal designation: | 16942 |
| Category: | Door communication\Send |
5.Similar functions
Receive
Switching action
Floor call
Internal call
Door call (incl. bell symbol on code keypad)
Switching action Keyless In
Door opener command
Door opener command of device with KeyLess In
Light function
Evaluation Sabotage KeyLessIn
Evaluate status automatic door opener DCS Communicator
Button event DCS Communicator
Button event home station/TC gateway
Evaluate voice message door station
Evaluate status of forwarding
Response - Evaluate status of JPEG image call
Evaluation of sabotage control device
Floor call
Internal call
Door call (incl. bell symbol on code keypad)
Switching action Keyless In
Door opener command
Door opener command of device with KeyLess In
Light function
Evaluation Sabotage KeyLessIn
Evaluate status automatic door opener DCS Communicator
Button event DCS Communicator
Button event home station/TC gateway
Evaluate voice message door station
Evaluate status of forwarding
Response - Evaluate status of JPEG image call
Evaluation of sabotage control device
Receive\Evaluate code from code keypad
Universal filter function with code specification as text
Universal filter function with code specification as value
Universal filter function with code specification as value
Send
Light function
Switching action
Query/set automatic door opener DCS Client
Door station voice message
Terminate call status of DCS bus devices
Switching action
Query/set automatic door opener DCS Client
Door station voice message
Terminate call status of DCS bus devices
Additional modules