1.Description
The node is specially matched to the logic node "Evaluate code from keypad\Universal filter function with code specification as Text" and the Gira DCS IP gateway (article no. 2620xx).
The 4-place code determined in the logic node "Evaluate code from code keypad\Universal filter function with code specification as text" can be compared with up to 7 codes by the module.
If the code determined by the DCS IP gateway does not match with any specification, then, for example, an entry can be made in a message archive.
Compared to the module 16926 "7x universal text comparator (14-byte text)", comparison codes can be conveniently set or specified with this module by entering the values via the Home/FacilityServer.
If a telegram is received at the input "Code (14-byte text)", then all 7 comparison codes are compared consecutively with the code (Input 1).
If one of the comparison codes matches the code at Input 1, then a 1 is sent to the related output and the comparison is cancelled.
If no code matches, then Output 8 sends a 1 telegram. Telegrams to the inputs 2 to 8 do not cause a calculation of the module.
If the code contains a leading zero, then the module 7x universal text comparator (text) must be used.
The 4-place code determined in the logic node "Evaluate code from code keypad\Universal filter function with code specification as text" can be compared with up to 7 codes by the module.
If the code determined by the DCS IP gateway does not match with any specification, then, for example, an entry can be made in a message archive.
Compared to the module 16926 "7x universal text comparator (14-byte text)", comparison codes can be conveniently set or specified with this module by entering the values via the Home/FacilityServer.
If a telegram is received at the input "Code (14-byte text)", then all 7 comparison codes are compared consecutively with the code (Input 1).
If one of the comparison codes matches the code at Input 1, then a 1 is sent to the related output and the comparison is cancelled.
If no code matches, then Output 8 sends a 1 telegram. Telegrams to the inputs 2 to 8 do not cause a calculation of the module.
If the code contains a leading zero, then the module 7x universal text comparator (text) must be used.
2.Inputs
| No. | Name | Initialisation | Description |
|---|---|---|---|
| 1 | Code (14-byte text) | "" | This input receives the variable code and compares it to the 7 comparison codes (texts). |
| 2 | Comparison code 1 | -1 | Code to be compared - value range 0 to 9999 |
| 3 | Comparison code 2 | -1 | Code to be compared - value range 0 to 9999 |
| 4 | Comparison code 3 | -1 | Code to be compared - value range 0 to 9999 |
| 5 | Comparison code 4 | -1 | Code to be compared - value range 0 to 9999 |
| 6 | Comparison code 5 | -1 | Code to be compared - value range 0 to 9999 |
| 7 | Comparison code 6 | -1 | Code to be compared - value range 0 to 9999 |
| 8 | Comparison code 7 | -1 | Code to be compared - value range 0 to 9999 |
3.Outputs
| No. | Name | Initialisation | SBC | Description |
|---|---|---|---|---|
| 1 | Trigger Comparison code 1 | 0 | s | The output sends a 1 when the code received at Input 1 matches the code at Input 2. |
| 2 | Trigger Comparison code 2 | 0 | s | The output sends a 1 when the code received at Input 1 matches the code at Input 3. |
| 3 | Trigger Comparison code 3 | 0 | s | The output sends a 1 when the code received at Input 1 matches the code at Input 3. |
| 4 | Trigger Comparison code 4 | 0 | s | The output sends a 1 when the code received at Input 1 matches the code at Input 4. |
| 5 | Trigger Comparison code 5 | 0 | s | The output sends a 1 when the code received at Input 1 matches the code at Input 5. |
| 6 | Trigger Comparison code 6 | 0 | s | The output sends a 1 when the code received at Input 1 matches the code at Input 6. |
| 7 | Trigger Comparison code 7 | 0 | s | The output sends a 1 when the code received at Input 1 matches the code at Input 7. |
| 8 | Trigger Other case | 0 | s | If the code received at Input 1 (text) does not match any of the comparison values, then the output sends a 1. |
s = send, sbc = send by change
4.Other
| Recalculation during start: | No |
|---|---|
| Module is retentive: | No |
| Internal designation: | 16925 |
| Category: | Door communication\Additional modules |
5.Similar functions
Receive
Switching action
Floor call
Internal call
Door call (incl. bell symbol on code keypad)
Switching action Keyless In
Door opener command
Door opener command of device with KeyLess In
Light function
Evaluation Sabotage KeyLessIn
Evaluate status automatic door opener DCS Communicator
Button event DCS Communicator
Button event home station/TC gateway
Evaluate voice message door station
Evaluate status of forwarding
Response - Evaluate status of JPEG image call
Evaluation of sabotage control device
Floor call
Internal call
Door call (incl. bell symbol on code keypad)
Switching action Keyless In
Door opener command
Door opener command of device with KeyLess In
Light function
Evaluation Sabotage KeyLessIn
Evaluate status automatic door opener DCS Communicator
Button event DCS Communicator
Button event home station/TC gateway
Evaluate voice message door station
Evaluate status of forwarding
Response - Evaluate status of JPEG image call
Evaluation of sabotage control device
Receive\Evaluate code from code keypad
Universal filter function with code specification as text
Universal filter function with code specification as value
Universal filter function with code specification as value
Send
Light function
Switching action
Query/set automatic door opener DCS Client
Door station voice message
Query/set forwarding
Terminate call status of DCS bus devices
Switching action
Query/set automatic door opener DCS Client
Door station voice message
Query/set forwarding
Terminate call status of DCS bus devices
Additional modules