1.Description
This module is used in conjunction with the DCS IP gateway (Gira Order No. 2620 ..). It evaluates whether a changeover/status query of the automatic door opener by the Gira HomeServer (logic node: Query/set automatic door opener DCS Client) is confirmed by the DCS IP gateway.
If successful, the module at Output 1 sends a 1 telegram. In the case of an error, Output 1 sends a 0 telegram.
In addition, the cause of the error is output at the error output.
If successful, the module at Output 1 sends a 1 telegram. In the case of an error, Output 1 sends a 0 telegram.
In addition, the cause of the error is output at the error output.
2.Inputs
| No. | Name | Initialisation | Description |
|---|---|---|---|
| 1 | Door communication Receive | "" | (14 bytes – Text) Here the internal communication object Door communication Receive is assigned by the DCS IP gateway. |
| 2 | DCS Communicator number | 0 | Specification of a number of the DCS Communicator to which filtering is to be applied. The input is pre-initialised with the value 0, i.e., no telegram is evaluated. A value in the value range of 1 to 255 must be parameterised. Note The number of the DCS Communicator (value range 1-255) is assigned in the configuration level of the DCS IP gateway. |
| 3 | Status | -1 | Specification of a status on which the incoming telegram should be filtered. 0 = automatic door opener for the selected number of the DCS Communicator is deactivated. 1 = automatic door opener for the selected number of the DCS Communicator is activated. |
3.Outputs
| No. | Name | Initialisation | SBC | Description |
|---|---|---|---|---|
| 1 | Action successful | 0 | s | The changeover request triggered via the Gira HomeServer logic node or the status query of the automatic door opener is confirmed with a 1-telegram if successful. If the changeover or the status query was not successful, a 0-telegram is sent. |
| 2 | DCS Communicator number | 0 | s | Number of the DCS Communicator, the automatic door opening changeover or the status feedback. (Value range 0–255) |
| 3 | Current status | -1 | s | In the case of successful changeover/status query, the output sends the current status. 0 = automatic door opener for the selected number of the DCS Communicator is deactivated. 1 = automatic door opener for the selected number of the DCS Communicator is activated. Note If the changeover request or the status query was not successful, this output does not send a telegram. |
| 4 | Error output | 0 | s | The output can be routed to the outside as a diagnostic output if necessary or during start-up in order to obtain information about possible errors. Values in the value range of 0 to 6 are sent. 0 = An error has not occurred. 1 = The automatic door opener is not enabled for the DCS Communicator. 2 = The DCS Communicator is offline. 3 = The DCS Communicator does not respond. 4 = Telegram received with a different number of the DCS Communicator. 5 = A telegram was received with a different structure. 6 = The default values must be checked |
s = send, sbc = send by change
4.Other
| Recalculation during start: | No |
|---|---|
| Module is retentive: | No |
| Internal designation: | 16934 |
| Category: | Door communication\Receive |
5.Similar functions
Receive
Switching action
Floor call
Internal call
Door call (incl. bell symbol on code keypad)
Switching action Keyless In
Door opener command
Door opener command of device with KeyLess In
Light function
Evaluation Sabotage KeyLessIn
Button event DCS Communicator
Button event home station/TC gateway
Evaluate voice message door station
Evaluate status of forwarding
Response - Evaluate status of JPEG image call
Evaluation of sabotage control device
Floor call
Internal call
Door call (incl. bell symbol on code keypad)
Switching action Keyless In
Door opener command
Door opener command of device with KeyLess In
Light function
Evaluation Sabotage KeyLessIn
Button event DCS Communicator
Button event home station/TC gateway
Evaluate voice message door station
Evaluate status of forwarding
Response - Evaluate status of JPEG image call
Evaluation of sabotage control device
Receive\Evaluate code from code keypad
Universal filter function with code specification as text
Universal filter function with code specification as value
Universal filter function with code specification as value
Send
Light function
Switching action
Query/set automatic door opener DCS Client
Door station voice message
Query/set forwarding
Terminate call status of DCS bus devices
Switching action
Query/set automatic door opener DCS Client
Door station voice message
Query/set forwarding
Terminate call status of DCS bus devices
Additional modules