1.Description
This module is used in conjunction with the DCS IP gateway (Gira Order No. 2620 ..).
It evaluates whether a changeover/status query of the forwarding setting by the Gira HomeServer (logic node: Query/set forwarding) is confirmed by the DCS IP gateway.
If successful, the module at the action output sends a 1-telegram.
In the case of an error, Output 1 sends a 0 telegram.
In addition, the cause of the error is output at the error output.
It evaluates whether a changeover/status query of the forwarding setting by the Gira HomeServer (logic node: Query/set forwarding) is confirmed by the DCS IP gateway.
If successful, the module at the action output sends a 1-telegram.
In the case of an error, Output 1 sends a 0 telegram.
In addition, the cause of the error is output at the error output.
Note
The module requires the firmware version of the DCS IP gateway 3 or higher!
2.Inputs
| No. | Name | Initialisation | Description |
|---|---|---|---|
| 1 | Door communication Receive | "" | (14 bytes – Text) Here the internal communication object Door communication Receive is assigned by the DCS IP gateway. |
| 2 | Forwarding ID | 0 | Specification of an action ID to which filtering is to be applied. The input is pre-initialised with the value 0, i.e., no telegram is evaluated. A value in the value range of 1 to 255 must be parameterised. Note The number for the action ID (value range 1-255) is assigned in the configuration level of the DCS IP gateway. |
| 3 | Status | -1 | Specification of a status on which the incoming telegram should be filtered. 0 = forwarding is assigned to a call button and is passive. 1 = forwarding is assigned to a call button and is active. 255 = forwarding is known in the system but not assigned to a call button. |
3.Outputs
| No. | Name | Initialisation | SBC | Description |
|---|---|---|---|---|
| 1 | Forwarding successful | 0 | s | The changeover request triggered via the Gira HomeServer logic node or the status query of the forwarding setting is confirmed with a 1-telegram if successful. If the changeover or the status query was not successful, a 0-telegram is sent. |
| 2 | Forwarding ID | 0 | s | Action ID for forwarding changeover or status feedback. (Value range 0–255) |
| 3 | Current status | -1 | s | In the case of successful changeover/status query, the output sends the current status. 0 = forwarding is assigned to a call button and is passive. 1 = forwarding is assigned to a call button and is active. 255 = forwarding is known in the system but not assigned to a call button. Note If the changeover request or the status query was not successful, this output does not send a telegram. |
| 4 | Error output | 0 | s | The output can be routed to the outside as a diagnostic output if necessary or during start-up in order to obtain information about possible errors. Values in the value range of 0 to 6 are sent. 0 = An error has not occurred. 1 = The forwarding ID is unknown 2 = The status could not be changed. 3 = Reserved 4= Telegram with different action ID received. 5= A telegram was received with a different structure. 6 = The default values must be checked. |
s = send, sbc = send by change
4.Other
| Recalculation during start: | No |
|---|---|
| Module is retentive: | No |
| Internal designation: | 16943 |
| Category: | Door communication\Receive |
5.Similar functions
Receive
Switching action
Floor call
Internal call
Door call (incl. bell symbol on code keypad)
Switching action Keyless In
Door opener command
Door opener command of device with KeyLess In
Light function
Evaluation Sabotage KeyLessIn
Evaluate status automatic door opener DCS Communicator
Button event DCS Communicator
Button event home station/TC gateway
Evaluate voice message door station
Response - Evaluate status of JPEG image call
Evaluation of sabotage control device
Floor call
Internal call
Door call (incl. bell symbol on code keypad)
Switching action Keyless In
Door opener command
Door opener command of device with KeyLess In
Light function
Evaluation Sabotage KeyLessIn
Evaluate status automatic door opener DCS Communicator
Button event DCS Communicator
Button event home station/TC gateway
Evaluate voice message door station
Response - Evaluate status of JPEG image call
Evaluation of sabotage control device
Receive\Evaluate code from code keypad
Universal filter function with code specification as text
Universal filter function with code specification as value
Universal filter function with code specification as value
Send
Light function
Switching action
Query/set automatic door opener DCS Client
Door station voice message
Query/set forwarding
Terminate call status of DCS bus devices
Switching action
Query/set automatic door opener DCS Client
Door station voice message
Query/set forwarding
Terminate call status of DCS bus devices
Additional modules