1.Description
With this module, switching actions can be sent from the HomeServer/FacilityServer on the door communication bus.
TC bus stations can be specifically addressed with the optional assignment of Inputs 2 to 4.
The following parameters are variable:
TC bus stations can be specifically addressed with the optional assignment of Inputs 2 to 4.
The following parameters are variable:
- Target address
- Top unit
- Button number
With set inputs, targeted TC bus telegrams (with switching actions) are sent which contain information on the target address, the top unit or the button number.
If there is no target address, a TC broadcast telegram is sent. This function simulates the switching action telegrams of the DCS communicator.
If there is no target address, a TC broadcast telegram is sent. This function simulates the switching action telegrams of the DCS communicator.
Note
The module is only used in conjunction with the Gira DCS-IP gateway (Article No. 2620 xx).
2.Inputs
| No. | Name | Initialisation | Description |
|---|---|---|---|
| 1 | Trigger | 0 | Each time a telegram is received and an input value greater than zero at this input, a switching function is generated depending on the Inputs 2 to 4 for the Gira DCS IP gateway and is sent to the output. |
| 2 | Target address | "" | Optional specification of the target address in the format 0xABCDFF. |
| 3 | Top unit | 32 | Specification of the top unit in the value range 0 to 31 |
| 4 | Button number | 128 | Specification of the button number in the value range 0 to 127 |
3.Outputs
| No. | Name | Initialisation | SBC | Description |
|---|---|---|---|---|
| 1 | Door communication Send | "" | s | (14 bytes – Text) Here the internal communication object Door communication Send is assigned by the DCS IP gateway. |
| 2 | Error output | 0 | s | The output can be routed to the outside as a diagnostic output if necessary or during start-up in order to obtain information about possible errors. Values in the value range 0 to 2 are sent: 0 = An error has not occurred. 1 = Length of target address 2 = Check the characters of the target address. 3 = Check the values for the button number or the top unit. |
s = send, sbc = send by change
4.Other
| Recalculation during start: | No |
|---|---|
| Module is retentive: | Yes |
| Internal designation: | 16921 |
| Category: | Door communication\Send |
5.Similar functions
Receive
Switching action
Floor call
Internal call
Door call (incl. bell symbol on code keypad)
Switching action Keyless In
Door opener command
Door opener command of device with KeyLess In
Light function
Evaluation Sabotage KeyLessIn
Evaluate status automatic door opener DCS Communicator
Button event DCS Communicator
Button event home station/TC gateway
Evaluate voice message door station
Evaluate status of forwarding
Response - Evaluate status of JPEG image call
Evaluation of sabotage control device
Floor call
Internal call
Door call (incl. bell symbol on code keypad)
Switching action Keyless In
Door opener command
Door opener command of device with KeyLess In
Light function
Evaluation Sabotage KeyLessIn
Evaluate status automatic door opener DCS Communicator
Button event DCS Communicator
Button event home station/TC gateway
Evaluate voice message door station
Evaluate status of forwarding
Response - Evaluate status of JPEG image call
Evaluation of sabotage control device
Receive\Evaluate code from code keypad
Universal filter function with code specification as text
Universal filter function with code specification as value
Universal filter function with code specification as value
Send
Light function
Query/set automatic door opener DCS Client
Door station voice message
Query/set forwarding
Terminate call status of DCS bus devices
Query/set automatic door opener DCS Client
Door station voice message
Query/set forwarding
Terminate call status of DCS bus devices
Additional modules