1.Description
This module forms the staircase lighting function. After the time (duration) has expired, the light can flash. Additional outputs also allow dimming down.
If a brightness value is to be sent after the "duration" expires instead of flashing, Output 3 is used for the "staircase light" and triggers a command on Output 2. This then sends a brightness value to the dimmer "staircase light".
If a brightness value is to be sent after the "duration" expires instead of flashing, Output 3 is used for the "staircase light" and triggers a command on Output 2. This then sends a brightness value to the dimmer "staircase light".
2.Inputs
| No. | Name | Initialisation | Description |
|---|---|---|---|
| 1 | E1 Duration (sec.) | 0 | Duration. Time in seconds for which Output 1 is to have the value one. If the input has the value zero, then Output 1 continuously has a one (continuous light). |
| 2 | E2 Object | 0 | Start of the module by a telegram with the value not equal to zero. Output 1 has a one for the duration. If this input receives a zero, then Output 1 switches to zero. |
| 3 | E3 Connectable (yes=1) | 0 | The module is connectable in series if this value is one. If Input 2 receives a value not equal to zero during the duration or the flashing time, then the running time is increased by the duration. |
| 4 | E4 Flashing (after duration) | 0 | Flashing duration in seconds. After the duration expires, Output 1 flashes with a frequency of 1 Hz. It is recommended that an even number of seconds be selected for the flashing duration. An odd number supplies 2 telegrams with the value zero at the end. It is recommended that this value be set to at least 30 seconds. If this input has the value zero, then no flashing occurs. |
| 5 | E5 block (1=blocked) | 0 | Lock-out. The module is locked if this input has the value one. The module sends a zero via Outputs 1-3. If a one is set here during the duration or during flashing, then all outputs immediately send a zero. All processes are stopped. |
3.Outputs
| No. | Name | Initialisation | SBC | Description |
|---|---|---|---|---|
| 1 | A1 | 0 | s | This output switches the device (e.g. staircase lighting) and supplies flashing after the duration expires (toggling between zero and one) with a frequency of 1 Hz. |
| 2 | A2 (flashing) | 0 | s | This output has the value one during flashing. Then the output sends a zero once. |
| 3 | A3 (Light) | 0 | s | This output behaves like Output 1 whereby flashing is eliminated. |
s = send, sbc = send by change
4.Other
| Recalculation during start: | No |
|---|---|
| Module is retentive: | No |
| Internal designation: | 9077 |
| Category: | Additional modules |