1.Description
The pulse width in percent is determined using an oscillating input signal. The module uses the first rising, then the first falling, and then the first rising edge, to determine the pulse width. Recurring identical telegrams are not considered. Output 2 sends a one when the first valid value has been determined. You can find further information on the pulse width in the documentation on the "Oscillator" module. The "Percent in pulse width" module is available in order to make an oscillating signal from the pulse width in percent again.
2.Inputs
| No. | Name | Initialisation | Description |
|---|---|---|---|
| 1 | E1 Value | 0 | Input value - Oscillating signal |
3.Outputs
| No. | Name | Initialisation | SBC | Description |
|---|---|---|---|---|
| 1 | A1 PW in % | 0 | s | Pulse width in percent |
| 2 | A2 Valid | 0 | s | Valid value - This output sends a 1 when the first valid value has been determined. |
s = send, sbc = send by change
4.Other
| Recalculation during start: | Yes |
|---|---|
| Module is retentive: | No |
| Internal designation: | 9072 |
| Category: | Converter |