1.Description
This module sends a time (decimal) at sunrise and at sunset. The longitude and latitude of the building location is specified for this purpose. The module sends when the HS/FS is restarted. Although a recalculation is carried out for each cycle tick, it only sends again for the first cycle tick per day, as the calculated values have also changed at this time.
If a change is carried out in the inputs, the module sends during the next cycle tick at the earliest.
If a change is carried out in the inputs, the module sends during the next cycle tick at the earliest.
2.Inputs
| No. | Name | Initialisation | Description |
|---|---|---|---|
| 1 | E1 Latitude | 0 | Latitude, e.g. 50.67 degrees |
| 2 | E2 longitude | 0 | Longitude, e.g. 67.89 degrees |
| 3 | E3 Cycle (min.) | 0 | Cycle in minutes. The position of the sun is recalculated at these intervals. If the value <= zero, then no calculation takes place. |
3.Outputs
| No. | Name | Initialisation | SBC | Description |
|---|---|---|---|---|
| 1 | A1 Sunrise (sbc) | 0 | sbc | Sends a time at sunrise (see below). 6.50 corresponds to 6.30 |
| 2 | A2 Sunset (sbc) | 0 | sbc | Sends a time at sunset (see below). 19.75 corresponds to 19.45 |
s = send, sbc = send by change
4.Other
| Recalculation during start: | Yes |
|---|---|
| Module is retentive: | No |
| Internal designation: | 9043 |
| Category: | Time functions |