1.Description
With this module, elapsed operating time of a communication object is determined and saved in non-volatile memory (permanently). If the HS/FS is restarted or in the case of value changes, the determined value is sent at the output.
2.Inputs
| No. | Name | Initialisation | Description |
|---|---|---|---|
| 1 | E1 | 0 | The communication object for which the elapsed operating time is to be determined and saved is assigned here. The operating hours are counted when the input value is not equal to zero. |
| 2 | E2 MI (sec.) | 0 | Measuring interval in seconds - The value of the input is checked at these time intervals. If the value is not equal to zero, the elapsed operating time meter is increased by the measuring interval. |
| 3 | E3 Reset | 0 | Reset - If this input gets a telegram with a value not equal to zero, the elapsed operating time meter is set to the value zero. |
3.Outputs
| No. | Name | Initialisation | SBC | Description |
|---|---|---|---|---|
| 1 | A1 Hr. (sbc) | 0 | sbc | Outputs the hours of operation. The time is output decimally. |
s = send, sbc = send by change
4.Other
| Recalculation during start: | Yes |
|---|---|
| Module is retentive: | Yes |
| Internal designation: | 9027 |
| Category: | Counter |