Occupancy simulation - Edit communication objects
Previous / Next | Search | Help / Occupancy simulation - Edit communication objects
The communication objects are assigned, changed or deleted in this mask.

Communication object

The KNX telegrams of this communication object are recorded or sent.

Use forced time

This option enables the selected communication object to be set to the value after expiry of the time (in min.).
Important
It is advisable to always use this option.
Example:
This can prevent a KNX actuator from remaining switched on if only an ON was recorded in the recording.
The forced time elapses after the ON telegram has been sent. ZERO is sent after expiry.

Time (in min.)

This time elapses each time a KNX telegram is sent for the communication object selected above.

Value

This value is sent after expiry of the Time (in min.).