1.Description
This module generates cyclic telegrams. A one is sent on Output 1, a zero on Output 2. The cycle time is adjustable. Output is always at the beginning of a new cycle.
2.Inputs
| No. | Name | Initialisation | Description |
|---|---|---|---|
| 1 | E1 Cycle (sec.) | 0 | Cycle in seconds - specifies the cycle time in seconds. A decimal value can be specified. If the module is switched on, receiving a value greater than zero immediately triggers a new cycle. |
| 2 | E2 On/Off | 0 | Switch On/Off - activates or deactivates the telegram generator. A value not equal to zero switches the telegram generator on. A value equal to zero switches the telegram generator off. Receiving a switch-on value cancels one running cycle and starts a new one. |
3.Outputs
| No. | Name | Initialisation | SBC | Description |
|---|---|---|---|---|
| 1 | A1 | 0 | s | Sends a 1 at the start of a cycle. A 1-bit value is output. |
| 2 | A2 neg | 0 | s | Sends a zero at the start of a cycle. A 1-bit value is output. |
s = send, sbc = send by change
4.Value table as an example
| Point in time in seconds | Cycle | Output 1 sends | Output 2 sends |
|---|---|---|---|
| Start | 10 | 1 | 0 |
| 10 | 10 | 1 | 0 |
| 20 | 10 | 1 | 0 |
| 30 | 10 | 1 | 0 |
5.Other
| Recalculation during start: | Yes |
|---|---|
| Module is retentive: | No |
| Internal designation: | 9030 |
| Category: | Additional modules |