1.Description
The automatic mode (Input 1) switches the module on or off (value not equal to zero). For as long as the setpoint temperature (Input 2) lies below the outside and inside temperature (Inputs 3 and 4), Output 1 sends the values 1 or 2 alternately. The time of the change is determined by the change cycle in minutes (Input 5). If at least one temperature, outside or inside temperature is no longer below the setpoint temperature, Output 1 sends the value 0.
2.Inputs
| No. | Name | Initialisation | Description |
|---|---|---|---|
| 1 | E1 Automatic mode | 0 | Automatic mode |
| 2 | E2 Setpoint temp | 0 | Setpoint temp |
| 3 | E3 Outside temp | 0 | Outside temp |
| 4 | E4 Ins. temp | 0 | Ins. temp |
| 5 | E5 Change cyc. in min. | 0 | Change cyc. in min. |
3.Outputs
| No. | Name | Initialisation | SBC | Description |
|---|---|---|---|---|
| 1 | A1 Cooling | 0 | s | Cooling |
s = send, sbc = send by change
4.Other
| Recalculation during start: | No |
|---|---|
| Module is retentive: | No |
| Internal designation: | 17786 |
| Category: | Heating-Ventilation-Air conditioning |