1.Description
If the module receives a telegram at Input 2, the specified delay is started. After the delay time, the original value at the output is sent.
2.Inputs
| No. | Name | Initialisation | Description |
|---|---|---|---|
| 1 | E1 (sec.) | 0 | Delay in seconds - the sending process is delayed by this value. A decimal value can be specified. In the case of a delay time that is equal to zero, the received input value is sent without a delay at the output. |
| 2 | E2 Signal | 0 | All communication objects that are to be processed are assigned here. |
3.Outputs
| No. | Name | Initialisation | SBC | Description |
|---|---|---|---|---|
| 1 | A1 | 0 | s | After expiry of the delay time, the unchanged input value is output. If, while a delay is running, a new input telegram is received at Input 2, only the last received telegram is delayed and output. |
s = send, sbc = send by change
4.Other
| Recalculation during start: | No |
|---|---|
| Module is retentive: | No |
| Internal designation: | 9018 |
| Category: | Delay |